Please confirm your location:


Arkansas warehouse now open.
Our USA warehouse is now open! Low cost shipping and an ever growing variety make ordering from the Arkansas warehouse even better value!
  Item found in the following categories;
> Hardware & Accessories > Scale Accessories

  RATED:

Quanum RTR Bomb System 1/6 scale Plug-n-Drop

Quanum RTR Bomb System 1/6 scale Plug-n-Drop

Ready to drop!
The Quanum R/C bomb system can be installed in minutes and is triggered by a spare servo channel in your receiver.
The bomb release mechanism uses a double hook system with a taper to positively release the bomb each and every time! The bomb is made from a super tough nylon so it will not break easily.
The kit also includes a spare release plate so you can make your own bomb of any shape/size.
You can fill the bomb with fine powder such as chalk to create that perfect explosion effect on impact.
An excellent addition to any .25 size or larger R/C plane.

The Quanum R/C bomb has become so popular it has been reviewed on many non-r/c sites and forums as a cool 'must-have' gizmo!
Take a look at gizmodo's blog: http://gizmodo.com/5455278/remote-control-bomb-system-tests-your-powers-of-restraint
 
Spec.
Scale: 1:6
Servo: 9g
Dimensions: 235 x 81mm (Bomb),  85 x 64 x 20mm (Base)
Weight: 103g
 
 
Contents:
1 x Bomb
1 x Release base (with servo installed)
1 x Foam nose
1 x Spare release plate 
 
Important.
Do not use this product in the vicinity of houses or other people. Always use rubber safety nose (included). Bomb now made of Nylon/fiber mix for longer life. Replacement nylon bombs available.


PRODUCT ID: Q002

Shipped from:
International Warehouse

Price

$15.08

Related Products
Customer Also Bought
Further discounts available for registered & logged-in customers.
 Customer rated
5114
crowns
  
 
Total of 79 discussions.
Ron  3 points - 4/19/2016
 
any one make something like this with a bomb about 4 inches long??
hunter lee  3 points - 3/21/2016
 
could this work for the striker spy drone i would like to know before i buy it *********************/World-Tech-Toys-Channel-Qua
dcopter/dp/B00YB5BDWO/ref=sr_1_1?s=toys-and-games&ie
=UTF8&qid=1458565330&sr=1-1&keywords=striker
drone
 Matthew 9 points
Not likely. This entire assembly weighs 103 grams, and that 'copter looks like it's loaded with accessories that also weigh it down. Also you'd need to completely add another receiver and battery just to operate the bomb servo.
Andrew  1 points - 2/29/2016
 
Put this on my Tundra and it worked great!
Benthebomb101  22 points - 11/4/2015
 
does this need a servo to trigger it?
 |TAB| 253 points
no, the servo is pre installed, you just a spare channel on your tx
BEST ANSWER CREDIT AWARDED
 Scarlet 28 points
It's fine with a aux chanel controlled by a switch. It will work with proportional channel but more exact for timing with a switch
phattZz  73 points - 3/28/2015
 
what is the maximum weight this can hold and release?
 Ral fRotten 2446 points
that would depend a lot on what plane you have! big planes can carry a lot of weight, small planes can carry very little weight, it's upto your combination
 Funky Pops 16 points
Hey Ral f, read the question!!
 Ral fRotten 2446 points
You a bit thick stephen? If your plane can lift 104grms and this weighs 103grms then the max lift and hold is 1grm, if it's not attached to anything the question is meaningless,
 Funky Pops 16 points
Now that you mention it, i'm a little thick in the midsection, not sure how that matters. I'm not thick in the head though. I never said you were wrong, but you are not answering the question as it was asked Ral f. I read it that phattZz would like to know how much weight the bomb drop can hold and still drop reliably. I am assuming he would then apply that knowledge to his particular situation, much the same way you are. You are simply putting the horse before that cart. No need to get nasty, there is a need to answer the question asked. Going by all the posts i've seen of yours I will now wait for your continued insults and non-constructive blabber.
 Ral fRotten 2446 points
Happy days! :-D
Customer Reviews
Create an account
Overall Rating
Deano
849 likes
ValueUNRATED
QualityUNRATED
12 thumbs up!
A cheap solution to custom bomb drops. The bomb itself is well made and painted and looks the part. The release is mechanical and is driven by a turnigy micro servo that has been pre-installed. One handy feature is the inclusion of a separate mounting plate that you can install on any other custom bomb that you design. The rubber nose attachment does not fasten properly and will require some form of adhesive to keep it in place.


2 comments. Reply..

Create an account
Overall Rating
Craig9080
242 likes
ValueUNRATED
QualityUNRATED
4 thumbs up!
Positive mechanism and a blast. Its a little big for most of the smaller planes, but thats a good safety feature. If you have room to fly a larger model, you probably have the room to drop this baby without any problems. 4* for the weak plastic on the bomb, but i was more interested in the mechanism anyway.


No comments. Reply..

Overall Rating
Crazy Pilot
19 likes
ValueUNRATED
QualityUNRATED
2 thumbs up!
Really cool!
I got one under my warbird. It looks so scale, and works well. All fiends are jealous. So I have ordered 2 more and 3 spare bombs.

Cool, works well and cheap also...


No comments. Reply..

Create an account
Overall Rating
madrick
21 likes
ValueUNRATED
QualityUNRATED
2 thumbs up!
Gadjet original. L'ouverture lors d'un choc au sol n'est pas garantie par le systme utilis pour solidariser les deux demies parties de la bombe, il y a mme un risque de casser les ttons plastiques. En bricolant un peu, a doit pouvoir le faire. Servo turnigy l'intrieur de la base.


No comments. Reply..

Create an account
Overall Rating
Karmann
431 likes
ValueUNRATED
QualityUNRATED
2 thumbs up!
A big big for my application but looks great. The pins that hold the halves together needs shortening, otherwise the halves are stuck and wont come apart on impact


No comments. Reply..

.....click here to see all reviews
Aff. Link