|
RC BOAT - GENESIS OFFSHORE |
Post Reply
|
Page <12345 7> |
| Author | |
Mattyc
Platinum (NZ) USERID: 8928 HobbyKing aficionado
Joined: 12/May/2009 Location: Ak, New Zealand Online Status: Offline Posts: 254 |
Quote Reply
Posted: 28/Apr/2010 at 12:04pm |
|
so the FSD's have better bearings and endbells are screwed on... might have to get one to try
|
|
|
Matt
People who can not solder have no business flying RC aircraft :P |
|
![]() |
|
Rebel Bay ;
Platinum (FR) USERID: 374460 Bargain Addict!
Joined: 01/Dec/2009 Location: FRANCE Online Status: Offline Posts: 86 |
Quote Reply
Posted: 01/May/2010 at 3:53pm |
|
There are copies of FSD brushless with integrated woter cooling jacket
![]() |
|
![]() |
|
milfiebre
Retail (US) USERID: 485750 Newbie
Joined: 15/May/2010 Online Status: Offline Posts: 9 |
Quote Reply
Posted: 16/May/2010 at 8:01am |
|
i just set one up with a 12xl 540 feigao 120 esc 2 x 3s 5000mah boat flysssssss 62-63 mph on stock rudder set up and still playing with it ....two thumbs up hk!!!!! |
|
![]() |
|
justintime2w8
Platinum (US) USERID: 414692 Newbie
Joined: 05/May/2010 Online Status: Offline Posts: 16 |
Quote Reply
Posted: 17/May/2010 at 11:52am |
|
How big of a prop? On 6s?
Nice!!
|
|
![]() |
|
PetATL
Gold (CZ) USERID: 322946 Newbie
Joined: 23/Mar/2010 Location: Czech Republic Online Status: Offline Posts: 2 |
Quote Reply
Posted: 19/May/2010 at 10:05am |
|
I find first few videos....
Edited by PetATL - 19/May/2010 at 10:07am |
|
![]() |
|
CrashinDutchman
Platinum (NL) USERID: 10722 Hobbyking Addict
Joined: 30/Jun/2009 Location: NL Online Status: Offline Posts: 853 |
Quote Reply
Posted: 20/May/2010 at 10:09pm |
|
Is that the standard configuration or did you upgrade to more cells/bigger motor?
Edited by CrashinDutchman - 20/May/2010 at 10:09pm |
|
![]() |
|
Rebel Bay ;
Platinum (FR) USERID: 374460 Bargain Addict!
Joined: 01/Dec/2009 Location: FRANCE Online Status: Offline Posts: 86 |
Quote Reply
Posted: 22/May/2010 at 1:41am |
|
I bought a GENESIS hull without motor and hardware Setup will be twin motor, may be 5S per motor 540XL 1800kV
|
|
![]() |
|
milfiebre
Retail (US) USERID: 485750 Newbie
Joined: 15/May/2010 Online Status: Offline Posts: 9 |
Quote Reply
Posted: 23/May/2010 at 7:09pm |
|
I meant i got a hull from hk but its the apparition hull kind off the same set up also have the genesis and they are very similar we will be running the genni today on stock motor with upgraded esc as the stock one got hot during set up on the bench????we will try with a 440 prop apparition has 640 and runs about 62-63mph cant wait to set up the genesis!!!keep you guy s posted and set up a link.. If you want to see video of aparition you tube search blowover2L...keep it coming HK>>>>>>>> |
|
![]() |
|
krusty
Platinum (CA) USERID: 195420 Newbie
Joined: 24/May/2010 Online Status: Offline Posts: 6 |
Quote Reply
Posted: 25/May/2010 at 7:16am |
|
Finally found a program that works with the esc not right but it's working.
So on to my review the biggest problem no manual for the ESC (if any one dose have it please forward it) the tube holding the drive cable fell out of my boat when I greased the shaft that was disappointing. So I fixed it as well as the rudder is not perpendicular to the hull, the battery holders are completely in the wrong spot about 8" to far forward.I placed my two 3s 3000 mAh 35C lipo's as far back as I could (parallel), I ran a Octura x440 balanced & sharpened prop, it ran 28.7 Mph on my gps (maiden voyage). I think it will break 30 Mph with a x442 prop. I will let you know. I will not try 4s lipo's with the current diameter of the cooling tube in my opinion you are going to blow the esc. All and all for the money a good buy @ $219. at 299 I wouldn't bother.
|
|
![]() |
|
milfiebre
Retail (US) USERID: 485750 Newbie
Joined: 15/May/2010 Online Status: Offline Posts: 9 |
Quote Reply
Posted: 25/May/2010 at 5:33pm |
|
Be careful with the 4s we blew a 120 turnigy esc with 4s and stock motor and a 440 prop 40 seconds later ....Needs lower kv motor and same turnigy esc should fly .....will keep u guys posted ... |
|
![]() |
|
Post Reply
|
Page <12345 7> |
| Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |