Assan rx gives problem with GY401???

Message Topic Search Topic Options Post Reply Create New Topic Printable Version

I installed a 9channel mini series rx in my raptor nitro.
So i need 9 channels as it has governor and remote gain on the 401.

setup: ff9 with assan modules and white mini series 9ch (not for sale anymore with HK) 
          futaba 401gyro with 9253, os hyper 

It is impossible to get the tail NOT SWAGGING.
i tried 20% 30 40 50 60 70 80 90 even 100% gain. it gives a differences but never a stable tail.
Is it possible that this rx is incompatible with the 401 or the 9253?

Edited by ketnet - 29/Dec/2009 at 4:29am

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version
ketnet Members Profile Send Private Message Find Members Posts Add to Buddy List Platinum (BE) USERID: 106230 Bargain Addict! Joined: 28/Apr/2009 Online Status: Offline Posts: 20	Quote Reply Topic: Assan rx gives problem with GY401??? Posted: 29/Dec/2009 at 4:16am
	I installed a 9channel mini series rx in my raptor nitro. So i need 9 channels as it has governor and remote gain on the 401. setup: ff9 with assan modules and white mini series 9ch (not for sale anymore with HK) futaba 401gyro with 9253, os hyper It is impossible to get the tail NOT SWAGGING. i tried 20% 30 40 50 60 70 80 90 even 100% gain. it gives a differences but never a stable tail. Is it possible that this rx is incompatible with the 401 or the 9253? Edited by ketnet - 29/Dec/2009 at 4:29am

beau0090_99 Members Profile Send Private Message Find Members Posts Add to Buddy List Platinum (US) USERID: 85616 Bargain Addict! Joined: 20/Feb/2009 Location: Minnesota, USA Online Status: Offline Posts: 74	Quote Reply Posted: 29/Dec/2009 at 10:41pm
	Below is from the Assan Website. The 9Ch Futaba Tx's only output 9 channels on PCM mode, but the modulation for the Assan Module only works on PPM, so you will only get 8 Ch if you are using Futaba 9 or 10 Ch Tx. If you are using a 12 or 14 ch Tx, then it should work. Good luck. Curtis 1. X8R9/X8R10 receiver will output corresponding signal in CH 9,CH 10 only when working with transmitter that comes with 9-10 channel under PPM mode(such as JR 9XII transmitter, that with 9chs in PPM mode). That means for transmitter without 9-10 channels under PPM mode(such as Futaba style transmitter,which have 8chs max at PPM mode), X8R9/X8R10 receiver's CH9, CH10 will not deliver. Edited by beau0090_99 - 29/Dec/2009 at 10:44pm

ketnet Members Profile Send Private Message Find Members Posts Add to Buddy List Platinum (BE) USERID: 106230 Bargain Addict! Joined: 28/Apr/2009 Online Status: Offline Posts: 20	Quote Reply Posted: 02/Jan/2010 at 1:08am
	My tx is a 9channel FF9. I know about the 9 channels. Thing is: channel 9 is for battery... all of the others are standard used channels as they should be used. I tried playing with the delay but no result. Tail still wagging and it used to be tight with RDP149 rx...

Cartoon Master Members Profile Send Private Message Find Members Posts Add to Buddy List Platinum (ES) USERID: 237900 Newbie Joined: 21/Jan/2010 Online Status: Offline Posts: 4	Quote Reply Posted: 04/Feb/2011 at 5:56am
	i have a futaba 9z and many assan rx, but the reciever´s with long antena already made 2 of my helis to crash :( for no reason the servos and motor run wild for a second and retun to the normal position ........... antenas away from any carbon and a 90 ^ angle still have that problem ....

ketnet Members Profile Send Private Message Find Members Posts Add to Buddy List Platinum (BE) USERID: 106230 Bargain Addict! Joined: 28/Apr/2009 Online Status: Offline Posts: 20	Quote Reply Posted: 05/Feb/2011 at 4:52pm
	btw, this was fixed a long time ago! it seems it were the bearings in the tail grips that were broken, so there was too much friction to be pushed so each time the servo pushed it over did it. 401 works perfectly with assan.