quad , help throttle ....

Hi Guys , I really need your help , I´m a guy u loves Rc cars and planes , but , for the 1º time , I saw this Quad´s and i love it , so i bought a:

550 frame
esc hobbyking 25\30mah
QUAD-CON16K HobbyKing Multi-Rotor Control Board V2.1 (At
L2210A-1650 Turnigy L2210A-1650 Brushless Motor (180w)

The radio i use for my planes is a TX , Futaba T6ex

my radio is on Heli mode , my problem is throttle , Whem i put gas up , de motor 4 (+-30%) , (i use the plus config.) stops , them the motor 1 stops(50%) too , I already changed esc´s , have done all the process to calibrate the esc (lipo-mode 1 bip) , changed motor , reconnect wires , redirect gyros , nothing works , don´t now if i have to change some settings on my radio (is stock , only reverse throttle) , but nothing works , no metter what i do .... he(quad) always go back because de motor 4 stops on 30% throtlle ....

The heli i have come RTF with radio set, never use this radio do fly Heli´s , so I not familiar with settings to....

thank you , hope to fly this quad soon.......



    

In plane mode ... I have the same problem....

What battery do you use, and which propellers? The Kv of those motors are pretty high for this application.

Fred

Originally posted by montek I have calibrated the motor with esc , gas up , one bip , gas down , umplug the bateries , and calibrate to 50% .... is done since day one. battery 11.1 , 2200 mah , 20c porpps 8x45 , waithing for 9x45

Did you get a 'bip' afterwards...? Some are two beebs, lower stick, one beep... I listen to the whole startup sequence, listen for the gap... Then repeat lowering stick in the gap...

Soo i need to change , esc 20 and propps ???