900MHZ 200mW Tx/Rx & 1/3-inch CCD Camera PAL 520TV

Message Topic Search Topic Options Post Reply Create New Topic Printable Version

Hi,

For some reason i do not seem to have any picture? I plugged the receiver in as i saw on the youtube video and it says channel 3. All four of the transmitter swithes are in the downward position in which they came. When powering up the transmitter the fuzzy white noise stops as if it is receiving the signal, but as i say there is no picture (i have taken the cap off).

I'm not sure which configurations i can try as there are no instructions so if you can please assist me and let me know how i can rectify this problem asap, i would greatly appreciate it.

I have it connected straight to the back of the tv AV sockets. I know that connection works with a playstation. I have no picture though? could it be the switches on the Tx or the channel on the Rx config?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version
RadioRacerz Members Profile Send Private Message Find Members Posts Add to Buddy List Platinum (GB) USERID: 1014618 Newbie Joined: 20/Apr/2012 Online Status: Offline Posts: 11	Quote Reply Topic: 900MHZ 200mW Tx/Rx & 1/3-inch CCD Camera PAL 520TV Posted: 06/May/2012 at 2:52am
	Hi, For some reason i do not seem to have any picture? I plugged the receiver in as i saw on the youtube video and it says channel 3. All four of the transmitter swithes are in the downward position in which they came. When powering up the transmitter the fuzzy white noise stops as if it is receiving the signal, but as i say there is no picture (i have taken the cap off). I'm not sure which configurations i can try as there are no instructions so if you can please assist me and let me know how i can rectify this problem asap, i would greatly appreciate it. I have it connected straight to the back of the tv AV sockets. I know that connection works with a playstation. I have no picture though? could it be the switches on the Tx or the channel on the Rx config?

JoeBlues Members Profile Send Private Message Find Members Posts Add to Buddy List Platinum (US) USERID: 1451372 Newbie Joined: 06/May/2012 Online Status: Offline Posts: 3	Quote Reply Posted: 06/May/2012 at 10:43pm
	Check your plug from the wiring harness that goes to the camera board. I just got mine yesterday and had no picture.. Turns out the white socket on the board is backwards and the white video wire is matching up with the red positive lead. The simple fix is to gently pull the socket off of the camera board and just flip it 180 deg so when you plug the harness in the red wire is going to the + input as indicated on the board, black - ground is in the middle and the white is aligned with the Vout. Hope this helps! :)

RadioRacerz Members Profile Send Private Message Find Members Posts Add to Buddy List Platinum (GB) USERID: 1014618 Newbie Joined: 20/Apr/2012 Online Status: Offline Posts: 11	Quote Reply Posted: 07/May/2012 at 4:03am
	Hi, Thanks for your reply. Thought i could upload pictures here but it doesnt seem so. I tried what you sugested but it still doesnt work Thanks for your help though. BTW what position are your switches on the Tx, mine are all down. and what channel is on your receiver. Mine seems to be default at 3. Anyone else know what i can do?

MonkeysPunk Members Profile Send Private Message Find Members Posts Add to Buddy List Platinum (GB) USERID: 1237392 Newbie Joined: 05/Jan/2012 Online Status: Offline Posts: 17	Quote Reply Posted: 08/Jun/2012 at 6:28am
	No help unfortunately as I have the same problem with mine. It is all connected correct and have tried it on 2 different monitors but still nothing. I think we may have broken cameras. I changed the wiring on mine before I first connected it so it won't be that for sure. I have also checked connections in Tx and Rx. Mine doesn't even show a difference between light and dark let alone a picture.

deadly83 Members Profile Send Private Message Find Members Posts Add to Buddy List Gold (RU) USERID: 1101338 Newbie Joined: 02/Oct/2011 Online Status: Offline Posts: 6	Quote Reply Posted: 27/Jun/2012 at 10:58pm
	What power supply do you use for reciever? Impulse doesn't work with it and power supply with output 12V marked ~ too, but ~ make reciever on-line, but it really doesn't work (switching channels and etc allowed) Just connect to reciever power 12 V standard battery (positive pole is center) Edited by deadly83 - 27/Jun/2012 at 11:03pm