Turnigy 30A BRUSHED ESC

Message Topic Search Topic Options Post Reply Create New Topic Printable Version

Turnigy 30A BRUSHED ESC

CLOSE UP IMAGE OF ESC + MANUAL IMAGE INSERTED BELOW + ATTACHED PDF FILE 

Got an old brushed motor laying around and want to put it to good use?
The Turnigy brushed ESC is an excellent speed controller with a linear throttle curve, Lipoly/NiMh ready and programmable braking.

Features: 
The break function can be turn on/off by the jumper
Battery type can be chosen by a jumper
For Lipo the threshold for each cell is 3.0v, less than the threshold ESC will gradually reduce the output power
PWM frequency is 2KHz
Over heat protection over 110C
Throttle signal loss for 1sec will gradually reduce the output power, after 2sec completely cut-off 
Spec.
Cont Current: 30A
Burst Current: 40A
BEC Mode: 5v/1A
Lipo Cells: 2-3
NiMH : 4-10
Weight: 21g
Size: 45x21x8mm
Leads: 
To Battery�65mm (No connector) 
To Motor-45mm (No connector)
To Receiver-195mm (with JR Type plug)

-Bill!

uploads/2928/Turnigy-30A_Brushed-ESC.pdf

Edited by wchiro - 25/Nov/2010 at 9:30pm

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version
Fugitive_Bill Members Profile Send Private Message Find Members Posts Visit Members Homepage Add to Buddy List Platinum (AU) USERID: 55382 Hobbyking Addict Joined: 18/Mar/2009 Location: Australia Online Status: Offline Posts: 1561	Topic: Turnigy 30A BRUSHED ESC Posted: 26/Jul/2009 at 10:25am
	Turnigy 30A BRUSHED ESC CLOSE UP IMAGE OF ESC + MANUAL IMAGE INSERTED BELOW + ATTACHED PDF FILE Got an old brushed motor laying around and want to put it to good use? The Turnigy brushed ESC is an excellent speed controller with a linear throttle curve, Lipoly/NiMh ready and programmable braking. Features: The break function can be turn on/off by the jumper Battery type can be chosen by a jumper For Lipo the threshold for each cell is 3.0v, less than the threshold ESC will gradually reduce the output power PWM frequency is 2KHz Over heat protection over 110C Throttle signal loss for 1sec will gradually reduce the output power, after 2sec completely cut-off Spec. Cont Current: 30A Burst Current: 40A BEC Mode: 5v/1A Lipo Cells: 2-3 NiMH : 4-10 Weight: 21g Size: 45x21x8mm Leads: To Battery�65mm (No connector) To Motor-45mm (No connector) To Receiver-195mm (with JR Type plug) -Bill! uploads/2928/Turnigy-30A_Brushed-ESC.pdf Edited by wchiro - 25/Nov/2010 at 9:30pm
	TRUMPY - It Came From The Desert... Who's scared NOW?