Problem with Turnigy 30fps ultra mini digicam

Good afternoon,

I've a problem with my Turnigy 30fps ultra mini digicam.

Turning it on the blue led turn on but nothing more happens.

I can press the record button but nothing happens.
I connect it to a pc and nothing too happens.

I've checked the MicroSD and erased files on it.
But it's still not working.

Reset button didn't resolve the problem too.

Can somebody help me?

Best regards

I've repaired it.

It's working again.

Txs

The first part of the problem was that everytime I was turning on
the camera blue and red led was on and the only way to turn it off
was to reset or wait for it to turn off of by it self.

So I've opened it and found the Camera-chip disconnected.
Reset worked well. Then it was turn on and off well but nothing
more.

So I opened this post to ask why I've nothing more.
But before buying a new one I've done more tests and opened the camera
once again.

And with it opened a reseted it with the camera-chip, without it,
and many times.

And once it begun to work well.

I think the error was I mounted the camera chip in a bad way.
With no camera the blue and red led are on.
With the camera at reverse only blue are on but it does nothing.
and with camera in a good way everything is working well.

If you check the connectors side of the camera-chip there's like
a point in a corner. I put this point to the "up part" of the camera.

If it works for you, tell it there

Good Luck

Originally posted by drdoom What is the link to the manual?

Have a look under the files tab on product page.

I have a problem with the video camera are recorded in 256 colors look bad .... help