Swamp Dawg Air Boat

Message Topic Search Topic Options Post Reply Create New Topic Printable Version

2306 x2000

note the shaft size goes to 3mm what prop does the boat have??

look at the spects the stab size is 8.75mm(part that goes to mount)

2211x2300

2mm shaft close to the same spec. you said the shaft was 2.3mm

can't find one that is close maybe they will stock later lots of spair

parts but no motor??

Edited by airwave - 29/Sep/2011 at 4:44am

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version
airwave Members Profile Send Private Message Find Members Posts Add to Buddy List Retail (US) USERID: 71296 Hobbyking Addict Joined: 27/Aug/2009 Online Status: Offline Posts: 2723	Quote Reply Posted: 29/Sep/2011 at 4:33am
	2306 x2000 note the shaft size goes to 3mm what prop does the boat have?? look at the spects the stab size is 8.75mm(part that goes to mount) 2211x2300 2mm shaft close to the same spec. you said the shaft was 2.3mm can't find one that is close maybe they will stock later lots of spair parts but no motor?? Edited by airwave - 29/Sep/2011 at 4:44am

syhammer Members Profile Send Private Message Find Members Posts Add to Buddy List Platinum (AU) USERID: 570358 Newbie Joined: 08/Oct/2010 Online Status: Offline Posts: 12	Quote Reply Posted: 02/Oct/2011 at 7:46pm
	prop=5.5 id ezf-1003 and HOBBYKING SWAMP DAWG AIR BOAT - MOTOR MOUNT PRODUCT ID: EZF-1007 a new mount can be made with a piece of ally or this ones hole can be filled out bigger if needed thanks airwave

airwave Members Profile Send Private Message Find Members Posts Add to Buddy List Retail (US) USERID: 71296 Hobbyking Addict Joined: 27/Aug/2009 Online Status: Offline Posts: 2723	Quote Reply Posted: 03/Oct/2011 at 6:00am
	syhammer, you may wish to look at this one also. TY-2730 it is faster than stock the air boat is a 400 size boat from what i have read. if you can drill it out easy some of these have a 10mm stab on them.i rewind the 2410& 2409 all the time realy just get it for the "kit" part and pull the windings. there is a shaft that will fit the 3mm and take it to 2.3mm (standard 400/370 can type motor size).it looks as if i will have to change to the TY motors as the towerpro and ty 24/09,10 have not restocked for some time now. the stock prop looks as if it had a press on mount for it with a cone??. you could use the 3mm with a standard prop.there is some one that is looking to up grade so IF you try any of thease please let all know how it comes out the motor i suggest are the cheep ones so that you don,t waste a lot of cash to try.

syhammer Members Profile Send Private Message Find Members Posts Add to Buddy List Platinum (AU) USERID: 570358 Newbie Joined: 08/Oct/2010 Online Status: Offline Posts: 12	Quote Reply Posted: 03/Oct/2011 at 5:03pm
	thanks airwav I'll try the ty-2730 and see what goes from their I will let you know how things work out when I get the motor Edited by syhammer - 03/Oct/2011 at 5:05pm

club17 Members Profile Send Private Message Find Members Posts Add to Buddy List Platinum (AU) USERID: 732710 HobbyKing Constituent Joined: 16/Dec/2010 Online Status: Offline Posts: 242	Quote Reply Posted: 06/Mar/2012 at 1:57pm
	The TY-2730. Is that using a 3s battery and a 5x5 prop

airwave Members Profile Send Private Message Find Members Posts Add to Buddy List Retail (US) USERID: 71296 Hobbyking Addict Joined: 27/Aug/2009 Online Status: Offline Posts: 2723	Quote Reply Posted: 06/Mar/2012 at 3:17pm
	no that would be close to 30,000 rpm. 2 cell only @~ 12 amps you will be ok.not sure for the prop, all 5x5 are not the same. if your looking for more power i would say.5x5 or 3 blade 5x4~5 on 3 cell. stock ESC will not hold up on this. bell Edited by airwave - 06/Mar/2012 at 3:29pm

club17 Members Profile Send Private Message Find Members Posts Add to Buddy List Platinum (AU) USERID: 732710 HobbyKing Constituent Joined: 16/Dec/2010 Online Status: Offline Posts: 242	Quote Reply Posted: 19/Mar/2012 at 7:36pm
	What 3s batteries would fit in the Swamp Dawg.

Drunkenyobbo Members Profile Send Private Message Find Members Posts Add to Buddy List Platinum (AU) USERID: 753484 Newbie Joined: 26/Apr/2012 Online Status: Offline Posts: 7	Quote Reply Posted: 25/Sep/2012 at 7:36pm
	Hi, I just bought a swamp dawg and although its a cheap boat I'm still dissapointed with the quality. The hull is so badly warped I can't use it and the motor won't even fit into the mount.