Hextronik MG-14 14g/2.2kg/0.11sec aircraft servo

 srepfler 1143 points

Testing mg-14 as tail servo on tricopter, great result.

 machete 20 points

Analog bro, good for 450 size heli :p

 srepfler 1143 points

I used on EPP FPV works nice, used on big delta wing works fine, strong and durable, like them. When people like them they do not put good review when it is not working they put bad review.

 srepfler 1143 points

me too, excellent servos

 srepfler 1143 points

Order while on BK, if new shipment arrives and more is ordered than received it will not show. Excellent servos.

 Rinalds 3 points

yes, orderd them 3 weeks ago but still nothing.

 srepfler 1143 points

Sorry to hear that, but eventually you will get them.

 Rinalds 3 points

YES FINALY, BUY WHILE YOU CAN!

 Rick662u 20 points

Hitec hs-65 arms will fit. Push down and use the screw. It is fine.

 worsone 60 points

i have tried the hitec hs -65 arms and could not get them to fit the best thing you can do is take the servo to your local hobby shop and test to see what would fit

 h2ojoao 27 points

The best servo I've ever used. Excellent for 3D.

 luisloko 20 points

used these servos on zaguis wings are very good, even reaching a speed of 180km / h work very well!

 srepfler 1143 points

Not all want to write review, this servos are excellent, extremely strong, price is best buy. Only complaint is noise ( you hear them). Highly recommend. Use them on EPP FPV ailerons, flying wing...

 worsone 60 points

Hi bud I also have them and I have 3 more on the way for what I use them they are a lot better that the blue hxt 500 and 900g servos I have lost a plane and a heli on the blue one`s because the servo horn slipped on these it does not happen and I am happy this is not a savox or align servo but so far for me they are better than the blue hxt hope this helps

 Nícolas 249 points

yes and compatible, and to great to use with gyro ..

 Rothmans 1386 points

Is this compatible with hobbyking transmiter?

 canuel 5 points

tres bon servo pour le prix

 Eduardo 32 points

Hello friend, yes it is compatible, ideal for helicopter and of excellent quality.

 luisloko 20 points

yes it is, they are very good quality extreme!

 65stang 3 points

works well with my turnigy 9x very strong servo.using 3 on my hk450 25 flights no problem with fly mentor control.well buy more

 dman3536 14 points

I would just order a replacement one there extremely cheap couldn't hurt to have extras

 Wieslaw 7 points

Good quality product for use in the t-rex, copterx and other 450, for me is about

 captincopter 7 points

for the exellent price of this servo, i personaly would purchase a new servo and keep the damaged for spares

 merlind 15 points

No-load about 30mA, with load around 100mA

 Agulhare 9 points

u can use up to 800mA from 3000mA, will depend on your battery. I hope it helped

 cocopl 52 points

yes , its the same case type like 9g hxt900 .

 Steemo 22 points

No they don't fit, they are too long on the "F" dimension as per above diagram. Aileron and Elevator fit fine but the elevator servo sticks out so far that you can not secure the canopy at all.

 TaMaster 24 points

Don`t listen to these bad reviewer , me and all my club friends are using these on many 'heavy' EPO models and they work great!

 clickthepirate 6 points

I have replaced the more expensive Hitec servos with the MG14 and they have worked flawlessly, I would not hesitate to recommend them to anyone needing a servos of this type and size.

 Gustavo 18 points

Im using this servo on my HK 450 tail, and its never fail.

 vasy1 607 points

Cuz they rule. I have not had any failires outside bad crashes. They just sing more compare to hxt900.

 boingk 265 points

Cheers everyone, glad to hear they're going well for you. Gives me a bit more confidence in ordering some. TaMaster, you got in first so you get the credit.

 merlind 15 points

Im using this servo on my HK 450 tail, and its never fail.

 jbc1234567 502 points

I use these quite alot, for elevator and rudder and never had one fail on me yet. Fast response and centre well, what more do you need?

 DANIEL 3 points

ive used these of sebart angel 30e, PA addiction which are large models. I have loads of throws on control surfaces and never had a problem.
These perform better than hitec hs-65 mg servos and a fifth of the price

 fiberglasser 32 points

I haven't had a bad one yet. These are perfect for any 450 heli. They are fast, tight and have plenty of torque. Plus you can't beat the price!

 C.C.Rid3r 12 points

I use this servo on Reactor bipe Electrifly , runs very well .Nice servo.

 Overfill 144 points

China! Thats why a product have a 5 crowns review when no one give it five crowns. I have write so many things they have delete.

 volto 41 points

Amps depend on how much load you put on them. Keep the load minimal and these will take very little, probably a tenth of an amp while moving. Less amperage is needed for higher voltage. Although metal gear would be a waste of weight compared with nylon for low torque applications.

 merlind 15 points

The current drain depends on the mechanical load that you have it and of the voltage of nutrition. in any case open a minimal current of consumption in vacuum ( no-load

 st200ol 258 points

One of the reviewers is using them on a Blade 400, and awards them 5 stars. I have a HK450 and I use them with no problems. Great servo.

 BillH 54 points

I used them on an Hk-450 pro and they work just fine, so they should be great on a Blade 400

 BillH 54 points

I am using it on a trex 450 v2 which is basically the same.

 symowallo 187 points

I am now running them on my HK/trex 450 v2 and have ordered more for my Blade 400. Very happy with them.

 DrAce 115 points

Yes, they will work perfectly!

 ilkayyy 39 points

Yes, it fits for 450sizes helis

 BillH 54 points

Yes. I am using them and they have great speed and torque.

 65stang 3 points

work very well and fit good no spacer.just plug and play on the hk 450. take crashes well very good centering.

 magnusEl 1238 points

It is ~30mm on the horn in the middle, the horn to the left is ~32mm.
//Magnus

 magnusEl 1238 points

Oh, and the hole size is 0,9mm.

 skyline_g35 131 points

You can use any servo for retracts. Just change the end points in your Tx.

 st200ol 258 points

Iam not sure but for $7.69 I just got a couple extra to use for spares.

 vanderlei 179 points

otimo srvo estou usando no hk 450 e responde muito bem no ciclico...

 Tatnorway 61 points

Maybe you can buy pushrod set for a helicopter?

 magnusEl 1238 points

I used a drill and opend up the holes to right size, maybe that is someting you could try?

 Jeff B 148 points

I have 30 of these MG14 in aircraft from 44' to 49" and there is no slop what so ever in them. I do wish alternative arms were available.

 mattyhawk 232 points

I would agree with Jeff, mostly. Realistically, they are sloppy compared to other higher quality, but for pattern plane use, they are very good. I use these in my nitro / gas planes as throttle servos, and work perfect. I also have them in my 115 mph MPX Funjet as well as landing gear servos in my HL SU-34 Twin TV EDF. I just wouldn't use them for 3D.

 mattyhawk 232 points

Oh, and I would NOT use them on a Heli.

 Demon 197 points

Really? I would... and Do. They are excellent servo's on the Swash of a heli, No chatter, no slop, crisp and accurate movement. - Perfect Swash servo's.

 mattyhawk 232 points

* Demon - The newer ones must be better. Mine do have slop in them, but they are getting quite used. I think I have had some of these for over a year with more fights than I can count.

 Old Stone 314 points

gerade die naechsten zwei Hextronic MG-14 bestellt. Mein Bekannter war von der Leistung ueberzeugt und wollte unbedingt auch welche fuer seinen Eigenbaujet

 Spoof boy 112 points

Sure is, especially for its size, load and price.

 mattyhawk 232 points

about 45 degrees.