A genuine 3D capable Micro? You better believe it! The Durafly Slick 360 has a spec sheet that is hard to beat, 2s power, real servos and a brushless motor put it head and shoulders above the rest!
The lightweight construction of this model, coupled with large control surfaces make it a brilliant 3D micro. Many models of this size are often limited by linear servos or cheap components, but not the slick! featuring pre-installed, fully proportional HK-5320 Digital servos, a Turnigy ESC and an AP05-3000kv brushless motor The build quality is just fantastic. Fully hinged ailerons are another example of why the slick stands out from the crowd. This is a fast model to put together, the motor and ESC are pre-installed, leaving you to glue on the wing and cowl then go and fly!
Performance is of course what 3D models are all about and this Slick is no slouch! Power is delivered courtesy of the powerful Turnigy Brushless motor running on 2s, for reliability a Turnigy ESC is pre-fitted and the servo/ESC connectors are all compatible with the 4 Channel Orange Micro RX (R415). This model might be cheap to put in the air, but make no mistake, this is one seriously capable 3D Micro, just make sure you take a handful of Lipoly batteries with you when you go and fly, hovering this Slick 360 round the basketball court gets addictive!
Specs:
Wingspan: 490mm
Length: 421mm
Flying Weight: 80g
ESC: 6A w/BEC
Servo: HK-5320 Digital 1.7g x 4
Motor: AP05 3000kv Brushless Outrunner
Includes:
Instruction Book
Glue
Requires:
Your Own 4 Channel TX/RX (compatible RX with 1.25mm Molex 3 Pin Connectors)
180mAh 2s Lipoly Battery
PRODUCT ID: Slick360-PNP
| 
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
