The HobbyKing Ventus EPO glider kit features removable wings for easy transport, an aluminum retract system and working flaps. Finished in EPO foam the HobbyKing Ventus glider boasts a smooth gloss finish that will have you cutting through the air in search of the next thermal uplift.
The long wingspan (2.3m) and short wing-chord make this a fast glider, to ensure agile performance the main wings have twin Carbon Fiber tubing plus an alloy insert. Landings are slow and predictable with flaps down.
The H-King Ventus is a high-quality, original design you wont find elsewhere.
The HobbyKing Ventus also includes a spinner and nose cone allowing you to choose between a powered or un-powered setup. Servo covers, control rods and all general hardware needed to complete this model are included. You will require 6 x 9gram servos for the control surfaces and 1 x 17gram MG servo for the landing gear, A 6 channel transmitter and receiver (Tx/Rx) and either a receiver battery (for an un-powred setup) or the Motor, ESC and Lipoly battery detailed below.
Be sure to order servo extension wires. These wings are long.
Material: EPO Foam
COG: 30mm from wing root (1st Carbon Spar
Motor: 28xx 900Kv Brushless Motor (Required)
ESC: 25A Brushless ESC (Required)
Servo: 6 X 9g Servo, 1X 17g Servo (Required)
Battery: 11.1v 1000~1500mAh (Required)
Propeller: 8 X 6 Folding Prop (suits 3.17mm motor shaft) (Included)
Motor: 28xx 900Kv Brushless Motor
ESC: 25A Brushless ESC
Servo: 6 X 9g Servo, 1X 17g Servo
Battery: 11.1v 1300mAh~1600mAh
Note: This model is double boxed to ensure it will arrive safely.
PRODUCT ID: Ventus
This product available from a warehouse near you!