HK15298B High Voltage Coreless Digital MG/BB Servo 66g / 20kg / 0.16s (AUS Warehouse)

Item found in the following categories;
> Servos & Parts > All Servos
> Servos & Parts > X-Large Servo 50g+
> Servos & Parts > HobbyKing Servo

RATED:


	HK15298B High Voltage Coreless Digital MG/BB Servo 66g / 20kg / 0.16s (AUS Warehouse)

HK15298B High Voltage Coreless Digital MG/BB Servo 66g / 20kg / 0.16s (AUS Warehouse)

HK15298B High Voltage Coreless Digital MG/BB Servo

Spec.
Torque: 18kg @ 6v, 20kg @ 7.4v
Weight: 66g

Speed: 0.18 / 60deg @ 6v, 0.16 / 60deg @ 7.4v
Voltage: 4.8v~7.4v
Motor type: Coreless
Plug: JR Style

Features:

Alloy Heatsink

Dual Ball-Raced

PRODUCT ID: HK15298B

This product available from a warehouse near you!

Weight (g)	66
Torque (kg)	20
Speed (Sec/60deg)	0.16
A(mm)	42
B(mm)	40
C(mm)	38
D(mm)	20
E(mm)	55
F(mm)	28

Update/Add my own data
Customer Data

92g

10+

$20.87

Further discounts available for registered & logged-in customers.

Customer rated

47
crowns

Total of 7 discussions.

Declan

3 points - 5/17/2013

hi, would this servo work in a traxxas slash 2wd with a 3s lipo. thanks

jasenrobbo

5 points - 4/28/2013

Hi can you get a replacement gear set for this servo

Patrick

68 points

There is no listing for any parts for this servo. I could only find replacement gear sets for some of the bluebird servos.

Bsd Racing

154 points - 1/25/2013

hi will this be any fast for an 8 scale buggy thanks.

Bsd Racing

154 points

Throttle and steering and will a 2s 2000 mah be enough for a couple of hours. Thanks

Senator315

614 points

Yes they are fast and strong. I used one for steering in my RC8e without issue. 2000mAh is pretty big. I get a full race day from 1600mAh.

jjhendo

2 points

definitely a good strong servo and cheaper than any stock RTR servo. leaves them all for dead!

*AusEngineMods*

11 points - 12/3/2012

Certainly sounds digital, will see how it performs *-)

*AusEngineMods*

11 points

OK after some track time this servo is a beast, very happy with it indeed and sticks with most my high end servos =D

The Joker

4 points - 3/1/2012

so can i use my 11.1v lipos with this servo?

H-KING_SCOTT

5237 points

No, 7.4v max

jason

7 points

i am using this sero in my hpi savage x converted to brushless and i am running two 3s (11.1v) and its fine as the bec regulates the voltage to the servo down to 5 or 6v. so yes its fine. good servo too!

Josh

13 points

yeah ll.i volts is a bit much they work really well at 6v 1600mah hump pack in a rc car which can max a bit higher voltage with a fresh charge but they stay strong untill the battery is dead

Josh

13 points

yes you can..
ONLY if you connect through rx (reciever)
because rx regulates the voltage to servo max input.. if you are worried you can always get a 7.2v resistor

jjhendo

2 points

don't hook this direct up to 11.1v you will cook it. always go through your esc/bec

tigerbomb8

17 points - 2/23/2012

does this have metal gears

jason

7 points

yes it does, very strong servo and has a alloy heatsink as part of the casing too!

Josh

13 points

yes, the 'MG/BB' means metal gears and ball bearings,
all the gears inside are metal, and you can also get replacements,
hpe this helps :)

papapeter

5 points

Ah Josh - did you actually look? First gear off the motor pinion is plastic - made from recycled garbage bags and lasts abput as long!

quasi

3 points - 11/12/2011

How many teeth/splines on the output shaft?

Kym

7 points

Futaba 25t spline I'd suggest

Customer Reviews

Overall Rating		Cananzi 7 likes
Value
Quality

Like it?

brought two of these servos. both are very noisey even when not being used. they centre perfectly and are very quick and strong. I still happy with the performance of them despite the noise.

2 comments. Reply..

Overall Rating		scott 2 likes
Value
Quality

Like it?

It is on my truggy and lasted a few races, still going strong. It works as good as any other high end servo and has outlasted a few other well known brand servos i have had in the past. Dont hesitate buy and save cash for other things like beer :)

No comments. Reply..

Overall Rating		*AusEngineMods* 10 likes
Value
Quality

Like it?

For the price these servos are great, I compare this servo with my Hitec HS 7955TG servo and I must say speed is much the same and the HK servo is stronger, sounds digital / coreless to and is not that noisy for a digi servo.. I did not expected anything flash from this servo and was sceptical about it being coreless digital, well I was wrong!!! It has out shined even the Blue Bird servos I have purchased from HK. Well done HK this servo is a winner and also looks the goods in my Jammin X1-CR Buggy, all the boys at the track can't believe how a $20 servo like this does as good as their $100 servos, ABSOLUTE BARGAIN!!! Tested after several litres of hard track time for those who doubt durability..

No comments. Reply..

Create an account

Overall Rating		Senator315 613 likes
Value
Quality

Like it?

Why buy a $100 servo when this does the job 95pcnt as well but only 20pcnt of the price. Winner!!!

No comments. Reply..

Overall Rating		5/2/2013 Luke 1 likes
Value
Quality

Like it?

Ive bought too of these and both only lasted one or two 2200 4s packs in my scx10 basher. I admit that I am hard on her on the rocks but its not like its a super heavy rig or anything. Might be good for a track car or true scaler, but useless in a rock crawler or any hard work. The first one just died and the second, the motor just started going flat out. I opened it up and there metal gears with the main gear being plastic and had stripped itself to bits. I dont recommend this product.

No comments. Reply..

.....click here to see all reviews

HK15298B High Voltage Coreless Digital MG/BB Servo 66g / 20kg / 0.16s (AUS Warehouse)

HK15298B High Voltage Coreless Digital MG/BB Servo Spec.Torque: 18kg @ 6v, 20kg @ 7.4vWeight: 66g Speed: 0.18 / 60deg @ 6v, 0.16 / 60deg @ 7.4vVoltage: 4.8v~7.4vMotor type: Coreless Plug: JR Style Features: Alloy Heatsink Dual Ball-Raced PRODUCT ID: HK15298B

HK15298B High Voltage Coreless Digital MG/BB Servo

Spec.
Torque: 18kg @ 6v, 20kg @ 7.4v
Weight: 66g

Speed: 0.18 / 60deg @ 6v, 0.16 / 60deg @ 7.4v
Voltage: 4.8v~7.4v
Motor type: Coreless
Plug: JR Style

Features:

Alloy Heatsink

Dual Ball-Raced

PRODUCT ID: HK15298B